Pos: 52.36 /Überschriften/Überschriften 3/A-E/E/Einstellen der Soll-Ballenfestigkeit @ 117\mod_1341219335997_78.docx @ 1021287 @ 3 @ 1
8.3.1
Setting the Setpoint Bale Firmness
Pos: 52.37 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Fortima F @ 252\mod_1397144815201_0.docx @ 1946747 @ @ 1
Fortima F
Pos: 52.38 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Rundballenpressen/Grundbild/Einstellen der Soll-Ballenfestigkeit Text @ 117\mod_1341217455785_78.docx @ 1021218 @ @ 1
2
1
Fig. 115
Display Bale Firmness
The value (1) under the bar display and the height of the bar (1) indicate the current actual bale
firmness as a %.
The value (2) above the bar display (2) shows the setpoint bale firmness set in per cent.
The bale firmness is specified by the user in the basic screen.
•
You can use the scroll wheel to select the desired value (the selection box is highlighted in
colour)
•
Pressing the scroll wheel allows you to jump into the selection box (the selection box is
highlighted in colour)
•
Turning the scroll wheel increases or reduces the value
•
Pressing the scroll wheel causes the setting to be applied and returns you from the
selection box
Pos: 52.39 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Rundballenpressen/Grundbild/Hinweis Einstellung über Touchscreen @ 79\mod_1315290154790_78.docx @ 701913 @ @ 1
Note
The values can also be set via the touchscreen.
Pos: 52.40 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
100 %
100
75
50
25
0
55 %
KRONE ISOBUS Terminal
151