Krone Fortima F 1250 Original Operating Instructions page 244

Operation
Pos: 60.47.6 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Fortima V 1500 (MC) / V 1800 (MC)_sprachneutral @ 226\mod_1392720827776_0.docx @ 1826878 @ @ 1
Fortima V 1500 (MC) / V 1800 (MC)
Pos: 60.47.7 /BA/Sicherheit/Rundballenpresse/Gefahr- Montagearbeiten Ballenauswerfer @ 32\mod_1253627872218_78.docx @ 316077 @ @ 1
DANGER! – Crush hazard!
Effect: Injuries to persons.
• Use suitable means to move the bale ejector (weight about 40 kg). Do not walk under the
bale ejector.
Pos: 60.47.8 /BA/Bedienung /Rundballenpresse/Ballenauswerfer/Ballenauswerfer demontieren_Bild_Fortima V @ 32\mod_1253628672187_78.docx @ 316152 @ @ 1
1
2
Fig. 197
Pos: 60.47.9 /BA/Bedienung /Rundballenpresse/Ballenauswerfer/Ballenauswerfer montieren/demontieren_Fortima V @ 32\mod_1253628326750_78.docx @ 316127 @ @ 1
Under some working conditions, for example on slopes, it is advisable to remove the bale
ejector (6).
To do this:
1. Open the front protective covers on the left and right-hand side of the machine.
2. Remove the clamping sleeves (1) on both sides of the support (2) and the bale ejector
support (4).
3. Remove the spring (3) and screws (5) on both sides.
4. Remove the bale ejector towards the back.
For assembly of the bale ejector see chapter "Initial start-up".
Pos: 60.48 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
244
3
5
4
1
1
6
VP-7-015_1