Safety Routines; Stopping And Securing The Machine; Supporting Lifted Machine And Machine Parts Securely - Krone Fortima F 1250 Original Operating Instructions

Pos: 26.1 /Überschriften/Überschriften 2/P-T/Sicherheitsroutinen @ 187\mod_1380089318480_78.docx @ 1608182 @ 2 @ 1
4.5

Safety routines

Pos: 26.2 /Überschriften/Überschriften 3/K-O/Maschine stillsetzen und sichern @ 190\mod_1381323544614_78.docx @ 1624780 @ 3 @ 1
4.5.1

Stopping and securing the machine

Pos: 26.3 /BA/Sicherheit/3. Sicherheitsroutinen/Maschine stillsetzen und sichern -gezogene Maschinen_mit Feststellbremse @ 244\mod_1395817975869_78.docx @ 1909963 @ @ 1
WARNING!
Crush hazard due to movement of the machine or machine parts!
If the machine has not been shut down, the machine or machine parts may move
unintentionally. As a result, people may be seriously injured or killed.
• Before leaving the machine: Shut down and secure the machine.
To park the machine securely:
• Park the machine on a stable and even surface.
• Switch off the drives and wait until coasting parts have come to a standstill.
• Switch off the tractor engine, remove the ignition key and take it with you.
• Use the parking brakes to secure the machine and tractor from rolling away.
Pos: 26.4 /Überschriften/Überschriften 3/A-E/A/Angehobene Maschine und Maschinenteile sicher unterbauen @ 190\mod_1381323662799_78.docx @ 1624809 @ 3 @ 1
4.5.2

Supporting lifted machine and machine parts securely

Pos: 26.5 /BA/Sicherheit/3. Sicherheitsroutinen/Angehobene Maschine und Maschinenteile sicher unterbauen_ALTE FORM @ 277\mod_1404810762702_78.docx @ 2077603 @ @ 1
WARNING!
Risk of injury due to movement of the machine or machine parts
If the machine is not supported securely, the machine or machine parts may roll, fall or drop.
As a result, people may be seriously injured or killed.
• Before working on or under raised components: Securely support machine or machine
parts.
To securely support the machine or machine parts:
• Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".
• Before performing any work on or under raised machine parts, lower the machine parts or
secure them mechanically with rigid safety supports (e.g. support stand, crane) or with a
hydraulic shut-off device (e.g. stop cock) to prevent them from dropping.
• Never support the machine or machine parts with materials which can buckle.
• Never support the machine or machine parts with hollow blocks or bricks. Hollow blocks or
bricks may break under continuous load.
• Never work under the machine or machine parts which are held up by a car jack.
Pos: 26.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Safety
25