Pos: 64.86.1 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Fortima F 1250 (MC) / F 1600 (MC)_sprachneutral @ 235\mod_1394190129453_0.docx @ 1869654 @ @ 1

Fortima F 1250 (MC) / F 1600 (MC)

Pos: 64.86.2 /BA/Wartung/Rundballenpresse/Rollbodenspannung_Zwischenüberschrift @ 241\mod_1395209479301_78.docx @ 1892321 @ @ 1

Floor Conveyor Tension

Pos: 64.86.3 /BA/Wartung/Rundballenpresse/Rollbodenspanner befindet sich_Fortima F1250 (MC), F1600 (MC) @ 241\mod_1395210949606_78.docx @ 1892660 @ @ 1

The floor conveyor tensioner is located right and left on the rear bale chamber housing below

the rear side guards.

Pos: 64.86.4 /BA/Wartung/Rundballenpresse/Rollbodenspannung_Bild_Fortima F1250 (MC), F1600 (MC) @ 240\mod_1395162295648_78.docx @ 1892261 @ @ 1

FOR00045_1

Fig. 263

Pos: 64.86.5 /BA/Wartung/Rundballenpresse/Rollbodenspannung_Hinweis_Fortima F1250 (MC), F1600 (MC) @ 240\mod_1395162172765_78.docx @ 1892142 @ @ 1

Note

A yellow marking can be seen in the plate cut out (1) when the new machine is delivered. The

green marking can be seen after the floor conveyor has set down.

Pos: 64.86.6 /BA/Wartung/Rundballenpresse/Rollbodenspannung prüfen_Text_Fortima F1250 (MC), F1600 (MC) @ 241\mod_1395210956955_78.docx @ 1892689 @ @ 1

Checking floor conveyor tension:

The floor conveyor tension is OK if a green marking can be seen in the plate cut out (1).

The floor conveyor tension must be corrected if a red marking can be seen in the plate cut out.

Pos: 64.86.7 /BA/Wartung/Rundballenpresse/Rollbodenspannung korrigieren_Text_Fortima F1250 (MC), F1600 (MC) @ 241\mod_1395210963533_78.docx @ 1892748 @ @ 1

Correcting floor conveyor tension (right-hand and left-hand sides of the machine):

•

Unscrew screw connections (2) and remove the lower guard (3) of the tensioning device.

•

Loosen counter nut (4).

•

Turn nut (5) until the green marking can be seen in the plate cut out.

•

Firmly tighten counter nut.

•

Mount the lower guard of the clamping device.

Pos: 64.87 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1