Fig. 206
•
Close the cleaning flaps (1) again.
•
Turn the stepped pulley in the direction of the arrow until the twine guiding slides (3) move
from the outside to the middle.
Note
The twine guiding slides (3) must move to the middle as the stepped pulley is turned. Otherwise
continue turning the stepped pulley in the direction of the arrow until the starting position is
reached (see picture).
Pos: 60.77 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
1
2
3
CP400003
Operation
253