Krone Fortima F 1250 Original Operating Instructions page 297

Round baler
Table of Contents

Advertisement

Pos: 64.71 /BA/Sicherheit/7. Gefahrenhinweise alt/Warnung - Quetschgefahr Pick-up @ 34\mod_1256048391518_78.docx @ 325820 @ @ 1
WARNING! – Crush hazard!
Effect: Foot injuries.
Lower pick-up to the ground.
Pos: 64.72 /BA/Wartung/Rundballenpresse/Spannen Ketten Pick-up @ 34\mod_1256047612908_78.docx @ 325791 @ @ 1
Pick-up
Fig. 257
Main drive pick-up
The main drive is located on the pick-up on the right side of the machine.
To check the chain tension:
The length of the spring when tensioned must be a = 30 mm.
To correct the chain tension:
Turn the nut (1) until the dimension a = 30 mm is set.
Drive pick-up
The drive pick-up is located on the pick-up on the right side of the machine.
To check the chain tension:
The length of the spring when tensioned must be b = 30 mm.
To correct the chain tension:
Turn the nut (2) until the dimension b = 30 mm is set.
Pos: 64.73 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
a
1
2
b
RBV06200
Maintenance
297

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortima f 1250 multicutFortima f 1600Fortima f 1600 multicutFortima v 1500Fortima v 1500 multicutFortima v 1800 ... Show all

Table of Contents