Tying Unit; Adjusting The Twine Limiter - Krone Fortima F 1250 Original Operating Instructions

Pos: 62.5 /Überschriften/Überschriften 2/A-E/Bindeeinrichtung @ 20\mod_1239003005331_78.docx @ 225610 @ 2 @ 1
12.1

Tying unit

Pos: 62.6 /BA/Bedienung /Rundballenpresse/Fadenbegrenzer einstellen @ 33\mod_1253781093098_78.docx @ 317111 @ 3 @ 1
12.1.1

Adjusting the twine limiter

The position of the twine limiter determines the distance from the outer wraps to the outside
edge of the bale.
The setting is made according to the length and type of crops to prevent the cord from slipping
off the round bale.
Pos: 62.7 /BA/Bedienung /Rundballenpresse/Netz-Garnbindung/Tabelle Fadenbegrenzer @ 33\mod_1253781242379_78.docx @ 317136 @ @ 1
Length of
crop material
Short
Medium
Long
Pos: 62.8 /BA/Bedienung /Rundballenpresse/Netz-Garnbindung/Bild Fadenbegrenzer @ 33\mod_1253780856988_78.docx @ 317086 @ @ 1
Fig. 216
Pos: 62.9 /BA/Bedienung /Rundballenpresse/Einstellung Fadenbegrenzer @ 33\mod_1253781370426_78.docx @ 317161 @ @ 1
Adjusting the twine limiter (setting must be the same on both sides):
1. Fold the tying unit forward.
2. Loosen the screws (3).
3. Push the twine limiter (1) into the desired position.
4. Tighten the screws (3).
Pos: 62.10 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Distance between the two twine
limiters
Narrow
Medium
Wide
3
2
1
KR-1-063
Settings
261