Adapting the height of the towing eye to the height of the tractor hitch
(perform setting on both sides):
Note
Before starting the adjustment, set the machine on the parking support and uncouple the
tractor.
Fig. 36
1. Reset Pick-up transport-fuse
•
Raise Pick-up (tractor hydraulics).
•
Release nuts (2).
•
Push height restriction (1) back.
•
Tighten nuts (2).
2. Activate control valve for "lower pick up"
1
Fig. 37
3. Adjusting position of the Pick-up
•
Wind parking support (1) up or down until dimension X = approx. 530 mm is reached.
Pos: 46.26 /BA/Erstinbetriebnahme/Rundballenpresse/Deichselhöhe anpassen_Fortima_Zusatz @ 244\mod_1395766750512_78.docx @ 1908467 @ @ 1
(from the ground to the middle of the lower screw head)
Pos: 46.27 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
2
2
1
RBV19221
Commissioning
X
FOR00014
69