Pos: 50.32.38 /BA/Info-Center/Rundballenpresse/Hauptmenü 1 Einstellungen/Menü 1-9 „Bindestartverzögerung"_Fortima V und F @ 187\mod_1380026614793_78.docx @ 1607852 @ 3 @ 1
7.7.10
Menu 1-9 „Tying Start Delay"
1-9
Fig. 87
Calling the menu
Main menu 1 "Settings" is called.
•
Select menu 1-9
colours.
•
Press
The display shows menu 1-9 "Tying Start Delay".
The symbol
Setting the tying start delay
The time delay is displayed in seconds.
Note
Tying start delay indicates how much time there is between
–
"Setpoint value of bale diameter reached" (Fortima V) or
–
"Setpoint value of bale firmness reached" (Fortima F)
and "Triggering tying process" (in automatic mode).
Due to this function, the driver gets sufficient time to move tractor and machine to a complete
standstill before tying process starts automatically.
•
Set the desired time delay by using
out.
•
Press
Pos: 50.32.39 /BA/Info-Center/Rundballenpresse/Hauptmenü 1 Einstellungen/Menü schließen @ 187\mod_1380091231622_78.docx @ 1608391 @ @ 1
esc
•
The
6
Pressing the
Pos: 50.33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
+
-
by using
key.
in the upper line indicates that the displayed value is saved.
key, the set time delay is saved, the symbol
button closes the open menu.
esc
6
button and holding it down brings up the home screen.
KRONE operation terminal Beta
1-9
5,0
0,0
or
key, the symbol is shown in reverse
or
key, the symbol
appears in the upper line.
2,5 s
in the upper line goes
119