Basic Safety Instructions; Importance Of The Operating Instructions; Personnel Qualification - Krone Fortima F 1250 Original Operating Instructions

Safety
Pos: 24.1 /Überschriften/Überschriften 2/F-J/Grundlegende Sicherheitshinweise @ 186\mod_1380009482364_78.docx @ 1606585 @ 2 @ 1
4.4

Basic safety instructions

Pos: 24.2 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Nichtbeachtung der SiHi und WaHi (Einführtext Grundlegende SiHi) @ 175\mod_1372834139379_78.docx @ 1504793 @ @ 1
Non-compliance with the safety instructions and warnings
Non-compliance with the safety instructions and warnings may result in injuries and damage to
the environment and property.
Pos: 24.3 /Überschriften/Überschriften 3/A-E/B/Bedeutung der Betriebsanleitung @ 186\mod_1380011391583_78.docx @ 1606670 @ 3 @ 1
4.4.1

Importance of the operating instructions

Pos: 24.4 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Bedeutung der Betriebsanleitung @ 175\mod_1372834861914_78.docx @ 1504822 @ @ 1
The operating instructions are an important document and a part of the machine. They are
intended for the user and contain information relevant to safety.
Only the procedures indicated in the operating instructions are reliable. If the operating
instructions are not followed, people may be seriously injured or killed.
• Before using the machine for the first time, read and follow all the "Basic safety instructions"
in the chapter Safety.
• Before working, also read and observe the respective sections in the operating instructions.
• Retain the operating instructions and ensure that they are always available.
• Hand over the operating instructions to subsequent users.
Pos: 24.5 /Überschriften/Überschriften 3/P-T/Personalqualifikation @ 187\mod_1380011550253_78.docx @ 1606703 @ 3 @ 1
4.4.2

Personnel qualification

Pos: 24.6 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Personalqualifikation @ 176\mod_1372840611484_78.docx @ 1505639 @ @ 1
If the machine is not used properly, people may be seriously injured or killed. To avoid
accidents, each person who works with the machine must satisfy the following minimum
requirements:
– He is physically capable of controlling the machine.
– He can work safely with the machine in accordance with these operating instructions.
– He understands the method of operation of the machine within the scope of his work and
can identify and avoid the dangers associated with the work.
– He has read the operating instructions and can implement the information in the operating
instructions accordingly.
– He is familiar with driving vehicles safely.
– For road travel he has adequate knowledge of the highway code and has the stipulated
driving licence.
Pos: 24.7 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
14