KRONE ISOBUS Terminal
Pos: 52.57 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Rundballenpressen/Hauptmenüs/Hauptmenü 1 Einstellungen/Hauptmenü 1 "Einstellungen" Fortima @ 252\mod_1397066265409_78.docx @ 1943525 @ 2 @ 1
8.6
Main Menu 1 „Settings"
Fig. 120
•
By pressing the function key
machine
•
Select main menu 1 (
reverse colours
•
Press function key
The display shows menu level 1 "Settings". The menu level 1 "Settings" is divided into the
following menus, depending on how the machine is equipped:
n
+
-
n
Pos: 52.58 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
156
)
by pressing function key
Menu 1-3 "Number of Net Winds"
Menu 1-4 "Sensitivity of direction display"
Menu 1-5 "Pre-Signalling"
Menu 1-6 "Filling Correction"
Menu 1-7 "Selection type of tying"
Menu 1-8 "Number of Twine Wraps"
Menu 1-9 "Tying Start Deceleration"
CC000463
in the basic screen you get into the menu level of the
or
, the symbol is shown in