Krone Bellima F 130 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Krone Manuals
  4. Farm Equipment
  5. Bellima F 130
  6. Original operating instructions

Krone Bellima F 130 Original Operating Instructions

Round baler
Hide thumbs Also See for Bellima F 130:
Table of Contents

Advertisement

Quick Links

Original Operating Instructions
Document no.: 150000148_06_us
Round Baler
Bellima F 130
From machine no.: 995323

Advertisement

Table of Contents
loading

Related Manuals for Krone Bellima F 130

Summary of Contents for Krone Bellima F 130

  • Page 1 Original Operating Instructions Document no.: 150000148_06_us Round Baler Bellima F 130 From machine no.: 995323...
  • Page 2 Contact Mailing address Physical address Krone North America, Inc. Krone North America, Inc. P.O. Box 18880 3363 Miac Cove Memphis, TN 38181-0880 Memphis, TN 38118 Phone +1 901 842-6011 +1 901 842-6016 E-mail info@krone-northamerica.com Internet www.krone-northamerica.com Information for enquiries and orders...

  • Page 3: Table Of Contents

    Description of the twine tying functionality .................  35 Description of the net wrapping functionality ................ 36 Technical data ..........................  38 Consumables .......................... 39 5.1.1 Oils.............................  39 5.1.2 Lubricating greases ........................ 39 Initial operation ........................ 41 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 4 8.18 Dismounting the bale ejector .....................  75 Driving and transport ...................... 76 Preparing the machine for road travel .................. 76 Checking road travel lighting .....................  77 Parking the machine ........................ 77 Settings.............................  78 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 5 Checking and adjusting the starter roll and the pressure rolls .......... 120 12.8 Changing O-ring seal on the twine coil starting device ............ 120 12.9 Setting the tailgate lock...................... 121 12.10 Setting the mechanical baling pressure indicator .............. 122 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 6 Contents Storage............................  124 Waste disposal........................ 126 Index............................ 127 Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 7: Information On This Document

    Information on This Document Validity This document is valid for machines of type: Bellima F 130 All information, illustrations and technical data in this document correspond to the latest state at the time of publication. We reserve the right to make design changes at any time and without notification of reasons.

  • Page 8: Figures

    H = height, L = length) Left-hand side of the machine Right-hand side of the machine side Direction of travel Moving direction Reference line for visible material Reference line for covered mater- Centre line Cable routes Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 9 When cleaning with compressed air, dirt particles are ejected at high speed and could get into the eyes. Therefore eyes could be hurt. „ Keep people away from the working area. „ Wear personal protective equipment when performing cleaning work with compressed air (e.g. eye protection). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 10: Conversion Table

    Horsepower Pressure Kilopascal 0.1450 Pounds per square inch Megapascal 145.0377 bar (non-SI) 14.5038 Torque Newtonmeter 0.7376 pound-foot or ft∙lbf foot-pound 8.8507 pound-inch or in∙lbf inch-pound Temperature Degrees Celsius °C °Cx1.8+32 Degrees °F Fahrenheit Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 11 Kilometres per km/h 0.6215 Miles per hour hour Volumes Litres 0.2642 US gallon US gal. Millilitre 0.0338 US ounce US oz. Cubic centi- cm³ 0.0610 Cubic inch in³ metre Weight Kilogram 2.2046 Pound Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 12: Safety

    • Attachment of unauthorised or unapproved additional equipment • Use of spare parts which are not KRONE original spare parts • Stationary operation of the machine Unauthorised modifications to the machine may affect the properties of the machine or disrupt proper operation.

  • Page 13: Service Life Of The Machine

    He has read the operating instructions and can implement the information in the operating instructions accordingly. • He is familiar with driving vehicles safely. • For road travel he has adequate knowledge of the highway code and has the stipulated driving licence. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 14: Personnel Qualification Of The Technicians

    Additional equipment and spare parts that do not correspond to the requirements of the manufacturer may affect the operational safety of the machine and cause accidents. „ To ensure operational safety, use original parts or standard parts which correspond to the requirements of the manufacturer. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 15: Jobs On The Machine

    „ In case of damage which may affect operational safety and cannot be repaired according to these operating instructions: Have damage repaired by a qualified service centre. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 16: Danger Zones

    This also applies to brief inspection work. „ Consider the information in all relevant operating instructions: • The operating instructions of the tractor • The operating instructions of the machine • The operating instructions of the universal shaft Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 17 „ In case of dangerous situations, immediately switch off drives and instruct persons to leave the danger zone. Danger zone due to trailing machine parts If machine parts are trailing, people may be seriously injured or killed. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 18: Ensuring Functionality Of Safety Devices

    „ Make sure every time after cleaning the safety labels that they are complete and legible. „ Immediately replace missing, damaged and unrecognizable safety labels. „ Provide spare parts with intended safety labels. Descriptions, explanations and order numbers of safety labels,refer to page 26. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 19: Road Safety

    „ Avoid abrupt steering movements on slopes. „ On slopes always deposit a round bale in such a way that it cannot move on its own. „ Do not park the machine on slopes. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 20: Parking The Machine Safely

    „ Check and clean the machine every day before using it for the first time. „ Check and clean the machine regularly during the working day. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 21: Sources Of Danger On The Machine

    „ Specify rules for the use of hearing protection and for the working time. „ During operation keep windows and doors of cabin closed. „ Remove hearing protection for road travel. Liquids under high pressure The following liquids are under high pressure: • Hydraulic oil Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 22: Dangers In Connection With Certain Activities: Working On The Machine

    Thus there is a risk of serious injuries or death. „ Before carrying out any repair, maintenance and cleaning work on the machine, shutdown and safeguard it, refer to page 24. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 23: Dangers In Connection With Certain Activities: Working On Wheels And Tyres

    The fitting of wheels and tyres requires adequate knowledge and approved mounting tools. „ If there is a lack of knowledge, have the wheels and tyres fitted by the KRONE dealer or by a qualified tyre service.

  • Page 24: Behaviour In Dangerous Situations And In Case Of Accidents

    „ Before working on or under raised machine parts: Secure machine or machine parts against lowering by means of hydraulic shut-off device (e.g. stop cock) on machine side. „ Before working on or under raised machine parts: Safely support machine or machine parts. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 25: Carrying Out Oil Level Check And Oil And Filter Element Changes Safely

    „ Lower raised machine parts or secure them against falling, refer to page 24. „ Shut down and secure the machine, refer to page 24. „ Cordon off the danger zone of the actuated moving machine parts in a clearly visible manner. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 26: Safety Labels On The Machine

    Safety labels on the machine Every safety label is provided with an order number and can be ordered directly from the authorised KRONE dealer. Immediately replace missing, damaged and unrecognisable safety labels. When attaching safety labels, the contact surface on the machine must be clean and free of dirt, oil and grease to ensure optimum adhesion of the labels.
  • Page 27 Safety Safety labels on the machine Position and meaning of safety labels RPG000-107 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 28 4. Order no. 942 057 0 (2x) WARNING! To avoid serious injury or death • Place safety lock valve in the locked position before entering area under the rear door. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 29 10. Order no. 942 060 0 (2x) WARNING! To avoid bodily injury • Keep hands, feet and clothing away from chain bars while machine is operating. • Keep away from rear of machine during bale ejection. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 30 16. Order no. 27 009 599 0 (2x) DANGER! To avoid serious injury or death • Do not climb onto the machine if the PTO. shaft is connected and the engine is running. • Shut off controls. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 31 18. Order no. 27 008 200 0 (1x) WARNING To avoid Possible injury Use only authentic KRONE spare parts and accessories authorised by the manufacturer. The use of spare parts, accessories or addi- tional equipment not manufactured, tested or approved by KRONE will exclude any liability for consequential damage.

  • Page 32: Safety Equipment

    2 units for right and left machine side, refer to page 61. Stop cock of the tailgate When doing work to the bale chamber or at the tailgate, the stop cock of the tailgate must be closed, see refer to page 73. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 33: Data Memory

    - if applicable in consultation with an expert. Additional functions regulated by a contractual agreement with the customer (e.g. remote maintenance) permit the transmission of certain machine data from the machine. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 34: Machine Description

    Machine description Machine overview Machine description Machine overview RPG000-013 Storage compartment Support jack Hose and cable support Pick-up Document storage tube Guide wheel Universal shaft Wheel chocks Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 35: Overload Protections On The Machine

    To ensure sufficient tying safety, you must be careful only to use synthetic twine that has a running length of 400-600 m/kg. INFORMATION For twine tying, KRONE recommends using KRONE excellent Round Baler Twine. This twine can be ordered under material number 00 929 949 * (750 m/kg) or 00 929 951 * (1,000 m/kg). Bellima F 130...

  • Page 36: Description Of The Net Wrapping Functionality

    The deflection lever (1) moves the drive wheel (4) which presses the drive wheel (4) against the friction wheel (3). This starts up the tying unit, guides the net to the round bale, and pulls it off the round bale. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 37 The spring rail (5) settles on the setting screw (2). There, the spring rail (5) moves outwards until it drops, depending on the set net layers. This triggers the cutting unit to cut the net. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 38: Technical Data

    Oil ISO VG 46 Delivery capacity hydraulics (min.) 30 L/min Delivery capacity hydraulics (max.) 60 L/min Electrical connections Electr. connection for road travel lighting (7-pole plug) 12 volts Electr. connection for operation (3-pole plug) 12 volts Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 39: Consumables

    5.1.2 Lubricating greases For the manual lubrication points, a lubricating grease pursuant to DIN 51818 of NLGI class 2 (lithium soap with EP additives) must be used. KRONE recommends not to use lubricating greases based on other substances. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 40 Technical data Consumables The filling quantity depends on the requirements. Lubricate the manual lubrication points until lubricating grease escapes at the bearing position. After lubrication, remove the grease escaping from the bearing position. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 41: Initial Operation

    „ The safety routines must be read and observed to avoid accidents, refer to page 24. Scope of delivery The machine is delivered together with the following additional parts located in the storage compartment or in the bale chamber. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 42: Mounting Guide Wheels On Pick-Up

    The guide wheels must be mounted in the same way on the right-hand and left-hand machine side. Guide wheels with pneumatic tyres are shown here by way of example. Guide wheels made of sheet steel must be mounted in the same way. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 43: Mounting Bale Ejector

    To ensure that the pick-up collects the crops evenly, the drawbar height of the machine must be adapted to the tractor used. The drawbar is set to an optimal height when the hitched machine is aligned horizontally or inclined slightly forward to the tractor. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 44: Universal Shaft

    The machine could be damaged if the universal shaft length is not checked when changing the tractor. „ In order to avoid damage to the machine, check universal shaft length every time the tractor is changed and correct it, if necessary, refer to page 45. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 45: Mounting Protective Cap Of Universal Shaft

    „ Remove the screws (2) and washers (3) pre-assembled on the machine. „ Push the protective cap (1) over the PTO shaft and mount on the machine using the screws (2) and washers (3), tightening torques, refer to page 94. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 46: Mounting Hose And Cable Support

    „ Rotate the starter roll (1) slightly in order to check whether the pressure rolls (2) rotate easily. „ If the pressure rolls (2) do not rotate easily, adjust the starter roll, refer to page 101. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 47: Preparing The Brake Disc Of The Wrapping Material Brake

    „ Push the flange plate (2) up or down in such a way that the desired assembling position (I), (II) or (III) can be set. „ Mount the screws (3). Tightening torque: refer to page 98 Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 48: Checking/Adapting The Tyre Pressure

    Before the initial operation, check and adjust the tyre pressure. A label at the PTO shaft end draws the attention to this important test: RP000-060 „ Checking and adjusting the tyre pressure, refer to page 97. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 49: Start-Up

    (e.g. tractor tyres). „ Couple and connect the hoses and cables to the designated connections as described in the operating instructions. Connecting machine to tractor RP000-098 Example image Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 50: Mounting Safety Chain

    The safety chain should have enough play when driving around curves. ü The machine is shut down and safeguarded, refer to page 24. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 51: Connecting Hydraulic Hoses

    If foreign objects or liquids get into the hydraulic system, the hydraulic system may be severely damaged. „ When connecting the quick couplings, ensure that they are clean and dry. „ Check the hydraulic hoses for abrasion and pinch point and replace if required. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 52: Mounting The Universal Shaft On The Tractor

    Risk of injury by failure to take account of the danger zone of the universal shaft If the danger zone of the universal shaft is ignored, persons can be seriously hurt or killed. „ To avoid accidents, observe the danger zone of the universal shaft, refer to page 17. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 53: Connecting The Electronic Baling Pressure Indicator

    „ Open the storage compartment. „ Insert the plug (2) of the electronic baling pressure indicator into the connector (1) at the machine. „ To lay the cable (3), insert the cable (3) into the supports (4). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 54: Connecting The Road Lighting

    „ Connect the 7-pin plug of the lighting cable (2) to the 7-pin socket (1) of the machine. „ Connect the 7-pin plug of the lighting cable (2) to the 7-pin socket (3) of the tractor. „ Lay the lighting cable (2) so that it does not touch the tractor wheels. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 55: Preparing The Operating Cables For Mechanical Machine Functions

    „ Guide the rope (1) to the tractor cabin in such a way that it is easily accessible but is not under tension and does not touch the tractor wheels when cornering. To operate the rope (1), refer to page 72. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 56: Operation

    To attain a consistent bale density inside a round bale, the bale chamber must be filled evenly. Here, the swath width is important. The swath width is ideal if the swath has exactly the same width as the bale chamber. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 57 „ Switch off the PTO shaft in the headland. „ Start the tying cycle earlier than indicated. Driving speed KRONE recommends a driving speed of 5-12 km/h The driving speed during the work must be adapted to the following conditions: •...

  • Page 58: Completion Of The Baling Process, Start Of Tying, And Ejection Of The Round Bale

    Æ The round bale rolls onto the field. Æ The tailgate is locked when the right bale pressure indicator (2) is below position "0". Initiating the tying cycle Depending on the configuration, the tying cycle can be initiated mechanically or hydraulically. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 59: Locking/Releasing The Cutting Unit Of The Net Wrapping

    RPG000-041 ü The machine is shut down and safeguarded, refer to page 24. „ Move the lever (2) in the direction of the arrow. „ Flip the stop piece (1) in the direction of the arrow. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 60: Using The Bale Counter

    „ To reset the bale counter (1), turn the knurled head screw (2) to set the indicator back to "0000". Operating support jack INFORMATION In order to increase the base of the support jack when the ground is soft, use a suitable support. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 61: Fitting Wheel Chocks

    ü The machine is shut down and safeguarded, refer to page 24. „ To dismount the wheel chocks (1) from the machine, press the supports (2) down, pull the wheel chocks (1) upwards, and remove them. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 62: Pick-Up

    (red, 1+) until the pick-up is raised. „ For the "Additional hydraulic connection for pick-up" version: Actuate the control unit at the tractor (yellow, 3+) until the pick-up is raised. 8.9.2 Adjusting the Pick-up Working Height RPG000-047 Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 63: Holding-Down Clamp

    The raking height of the pick-up drum (1) is set behind the side guard. The setting must be identical on the right-hand and left-hand machine side. KRONE recommends a distance between tines and ground of 20-30 mm. „ For the "Hydraulic connection for tailgate and pick-up" version: Actuate the control unit at the tractor (red, 1+) until the pick-up is raised.

  • Page 64: Dismounting/Mounting The Lower Holding-Down Clamp

    „ Dismount the linch pin (2) on the right-hand and left-hand machine side. „ Remove the holding-down clamp (1). Mounting „ Insert the holding-down clamp (1) above the pick-up and secure it on the right-hand and left- hand machine side using the linch pins (2). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 65: Dismounting/Mounting The Upper Holding-Down Clamp

    „ Cut off any soiled section of twine or use a new twine spool. „ Clean the components of the twine tying before inserting the twine. ü The machine is shut down and safeguarded, refer to page 24. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 66 „ Shorten the twine ends of all reef knots (2) to X=15-20 mm. „ Guide the beginning of the twine spool 1.3/2.3 via the eyelet (1) above it through the twine guide eye to the twine retainer. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 67 RP000-081 NOTICE! The arrow (2) shows the direction of rotation of the drive roll (3). „ Place the two twines (1) around the drive roll (3). To set the number of twine layers, refer to page 79. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 68 „ After inserting, tighten the two twines by pulling the excessive length of twine back into the storage compartment. To set the twine guide at the starter roller (3), refer to page 119. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 69: Dismounting/Mounting The Start Device Of The Twine Tying System

    Also observe the information on the package provided by the tying material manufacturer. INFORMATION For trouble-free use in the field, KRONE recommends one of the "KRONE excellent" nets, see label on the machine with the number 27 018 640 *. Bellima F 130...
  • Page 70 If the net roll is not centrally aligned: „ Use a mounting lever (6) to push the net roll in the desired direction shown by the arrow until the net roll is positioned in the centre. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 71: Insert Net

    100 mm in the bale chamber from the back of the machine. „ If required, unlock the cutting unit of the net wrapping, refer to page 59. To set the number of net layers, refer to page 80. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 72: Indicating The Baling Pressure Via The Electronic Baling Pressure Indicator

    Æ The display (1) changes to the desired position [I] or [II]. Æ Via the tractor hydraulics, the tailgate can be open/closed, refer to page 73, or the pick-up can be brought into transport/working position, refer to page 62. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 73: Opens/Closes The Tailgate

    „ Raise the stop cock (1) and move it to position (I). Æ The tailgate can be closed. Closing the stop cock „ Raise the stop cock (1) and move it to position (II). Æ The tailgate cannot be closed. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 74: Removing Crop Blockages

    ü For the "Hydraulic switching valve" version: The hydraulic switching valve is set to "Bringing the pick-up to transport/working position",refer to page 72. „ Reverse with the PTO shaft running while repeatedly actuating the control unit in the tractor (red, 1+) to raise and lower the pick-up. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 75: Dismounting The Bale Ejector

    „ Remove the cover sheet (1) and the bale ejector (2) from the support (3) on the right-hand and left-hand machine sides. „ Mount the screw connection (4) on the right-hand and left-hand machine side. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 76: Driving And Transport

    ü The road lighting has been connected, tested and is functioning properly, refer to page 54. ü The pick-up is fully raised in transport position, refer to page 62. ü The fixing bolt for the pick-up is in transport position, refer to page 62. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 77: Checking Road Travel Lighting

    „ Disconnect the road lighting plug, refer to page 54. „ Disconnect the hydraulic hose lines and hook them into the support at the machine. „ Drive the tractor away carefully. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 78: Settings

    In this case, the working height is adjusted to the lowest setting. If the pick-up fails to pick the crops up well even in the lowest working height setting, adjust the drawbar height, refer to page 43. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 79: Adjusting The Relief Springs Of The Pick-Up

    The longer the crops, the smaller the required diameter of the stepped pulley (2) and the less twine is tied around the round bale. „ Place the two twines (1) around one of the 3 stepped pulleys in position [I], [II] or [III]. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 80: Adjusting The Twine Limiter

    RPG000-022 The number of net layers is set via the setting screw (1) on the right-hand side of the machine. Proceed as follows to set the number of net layers via dimension X: Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 81: Setting The Baling Pressure

    Make the following settings equally on the right-hand and left-hand side of the machine: ü The side guard is open. „ Loosen the wing nut (1). „ Move the preselection indicator (2) up or down to the desired position. „ Tighten the wing nut (1). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 82: Adjusting The Sensors Of The Electronic Baling Pressure Indicator

    „ Switch the vehicle electrical system on. „ Manually, move the red baling pressure indicator (2) to the black preselection indicator (1); check whether the indicator lamps light up at the point in time when the two hands overlap. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 83: Setting The Twine Brake

    It is possible that the compression springs (3) will need to be adjusted differently so that the cut- off twine ends have the same length. 10.9 Setting the driver of the twine tying For the "Twine tying" or "Net and twine tying" version RP000-189 Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 84: Setting The Wrapping Material Brake

    (1). „ To set the main brake spring (6), loosen the counter nut (5) and correct the setting at the setting screw (4). „ After setting, re-tighten the counter nuts (2) and (5). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 85: Setting The Hydraulic Tying Start Unit For Net And Twine Tying

    (1) to the storage compartment floor (4). „ To choose the net wrapping functionality [II], attach the steel cable (1) to the lever (3) and the plastic cable (2) to the storage compartment floor (4). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 86: Setting The Bale Ejector

    Æ The bale ejector is set correctly if the distance is 10-30 mm. If the distance is greater than 30 mm: „ Tighten the screws (3) more. If the distance is smaller than 10 mm: „ Loosen the screws (3). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 87: Maintenance

    Grease lubrication points according to lubrica- refer to page 89 tion chart Check the hydraulic hoses for leaks and, if ne- cessary, have them replaced by a KRONE service partner. Check electrical connection cables and road refer to page 77 travel lighting...

  • Page 88: Maintenance - Once After 10 Hours

    Retighten wheel nuts refer to page 98 Check tyre pressure refer to page 97 Check the hydraulic hoses for leaks and, if ne- cessary, have them replaced by a KRONE service partner. Clean the bushing and the drawbar eye refer to page 111 11.1.3 Maintenance –...

  • Page 89: Lubrication Chart

    „ Apply two strokes of lubricating grease from the grease gun per grease nipple. „ Remove excess lubricating grease at the grease nipple. „ Apply the oil evenly. Oils Plant-based oils, unless spe- cified otherwise. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 90 Maintenance 11.2 Lubrication Chart Left-hand machine side RPG000-031 Every 24 operating hours Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 91 Maintenance Lubrication Chart 11.2 (10) Every 50 operating hours Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 92 Maintenance 11.2 Lubrication Chart Every 100 operating hours Right and rear machine side RPG000-032 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 93 Maintenance Lubrication Chart 11.2 Every 24 operating hours Every 50 operating hours Every 100 operating hours Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 94: Lubricating The Universal Shaft

    Metric thread screws with control thread INFORMATION The table does not apply to countersunk screws with hexagon socket in case the countersunk screw is tightened via hexagon socket. DV000-001 Thread size Strength class on screw head Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 95 Tightening torque (Nm) M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M20 x 1.5 M24 x 2 1,121 1,312 M27 x 2 1,148 1,635 1,914 M30 x 1.5 2,100 2,650 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 96 The term “locking screw” includes the drain plug, the inspection screw as well as the ventilation and breather filters. The table only applies to locking screws with external hexagon together with copper seal ring and for bleed valves made of brass with shaped seal ring. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 97: Checking/Maintaining Tyres

    Inspect the tyres visually „ Visually inspect tyres for cuts or breaks. Æ If there are cuts or breaks in the tyres, have the tyres repaired or replaced by a KRONE service partner. Maintenance intervals for visual inspection of the tyres, refer to page 87.

  • Page 98: Servicing The Main Gearbox

    ü The machine is shut down and safeguarded, refer to page 24. „ Comply with the safety routine "Safe execution of oil level check, oil and filter element exchange", refer to page 25. „ Dismount the guard (1) behind the crossbeam (2). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 99: Bleed The Friction Clutch On The Universal Shaft

    „ Tighten the 8 screws (1) crosswise until the cover ring (3) is positioned directly on the outside washers (2). Ensure that the screws (1) are not overtightened. „ Undo the 8 screws (1) by one sixth of a turn. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 100: Checking And Adjusting The Twine Tying Unit

    „ Clean the twine guide slides (3), the drivers (4) and the area surrounding these components. „ If necessary, oil the drive chains (2). „ Close the 2 covers (1). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 101: Checking And Adjusting The Starter Roll And The Pressure Rolls

    „ Loosen the screws (1) and move the cutter blades (5) until they run smoothly once more. „ Tighten the screws (1) only so far that the cutter blades (5) still run smoothly. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 102: Checking And Adjusting The Net Wrapping Device

    (3). The distance X between setting screw (2) and spring rail (3) must be X=2-3 mm. „ To set the distance X, loosen the screws (4) and move the spring rail (3) until the dimension X=2-3 mm. „ Tighten the screws (4). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 103: Adjusting The Cutting Unit

    ü The dimension has been correctly set when the spring rail (2) is positioned on the setting screw (1), refer to page 102. „ To adjust the distance X, loosen the screws (5) and move the spring rail until the distance X=1 mm. „ Tighten the screws (5). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 104: Checking And Setting The Hydraulic Tying Start Unit

    When checking hydraulic hoses, the state-specific conditions (e.g., BGVU) must be observed. Performing a visual inspection „ Visually inspect all hydraulic hoses for damage and leaks and have them replaced by an authorised specialist if necessary. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 105: Checking And Setting The Lock Hook Blocker At The Tailgate

    ü The tailgate is open and hydraulically blocked by means of the stop cock. ü The left side hood is open. „ Loosen the screw connections (3) and move them in the oblong hole until the dimension Y=2-5 mm. „ Tighten the screw connections (3). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 106: Checking And Setting The Transverse Worm Conveyors Of The Pick-Up

    „ When working on the drive chains, wear protective equipment, refer to page 18. „ Before working on any drive chains, shut down and safeguard the machine, refer to page 24. 11.14.1 Drive chain of the pick-up RPG000-028 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 107 ü The guide wheel has been dismounted. „ Dismount the holding-down clamp (1). „ Dismount the guard (2). „ If necessary, remove the residue of the shear bolt (4). „ Mount a new shear bolt (4). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 108: Drive Chain Of The Bale Formation Conveyor

    ü The machine is shut down and safeguarded, refer to page 24. ü The side hood on the right-hand machine side is open. „ To tension the drive chain (3), set the dimension X=150 mm using the counter nut (1). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 109: Check The Distance Of The Roller To The Bale Formation Conveyor Chain, Set If Applicable

    „ Loosen the screws (1) and move the perforated plate (2) until the correct distance between roller and bale formation conveyor chain is set. „ Tighten the screws (1). „ Mount the nut (3). Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 110: Cleaning The Machine

    „ Also after each use, clean all moving parts on the brake linkage and brake lever with compressed air, e.g. piston rod, brake lever and slack adjuster. This can prevent mechanical blockages. „ If required, repeat the cleaning several times a day. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 111: Clean The Bushing And The Drawbar Eye

    (1) in the drawbar eye (2) is X=43 mm. If the dimension X is exceeded, the drawbar eye (1) must be replaced by a KRONE service partner. „ To minimize wear, clean the bushing (1) and the drawbar eye (2) several times a day and coat with grease.
  • Page 112 2 Stop cock tailgate 5 Hydraulic cylinder tying start unit (for the "Hydraulic tying start unit" version) version 3 Hydraulic cylinder tailgate Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 113: Circuit Diagram Of The Electronic Baling Pressure Indicator

    Circuit diagram of the electronic baling pressure indicator RP000-280 1 Circuit board 6 Signal lamp right side 2 Plug 7 Signal lamp left side 3 Bushing 8 Signal generator 4 Sensor right side 9 Plug (2-pole) 5 Sensor left side Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 114: Disturbance, Cause And Remedy

    Remedy „ Check the setting of the drawbar. The machine is hooked in too low in the front. „ If necessary, have a KRONE service partner adjust the drawbar height, refer to page 43. Disturbance: Crops fall out during the baling process between the roller and the bale formation conveyor chain.

  • Page 115: Disturbances At The Tying Unit Or During The Tying Cycle

    The cutting unit does not move fully down. whether the switching valve is set to net wrapping, refer to page 85. „ Have a KRONE service partner replace the cutter blade. The cutting unit is blunt. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 116: Disturbances At The Twine Tying Unit

    „ Slow down at the end of the baling process. „ Before the start of tying, Have the round bale re-baled without adding crops. Disturbance: The twine is too far away from the edge of the round bale. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 117: Disturbances During Or After The Baling Process

    „ Correctly set the baling pressure indicator, The baling pressure indicators refer to are not set correctly. page 122. Disturbance: The baling pressure indicator does not move up to the top baling pressure range. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 118 Disturbance: The tailgate cannot be closed completely. Possible cause Remedy „ Seal the hydraulic cylinder or have it replaced by a KRONE The hydraulic cylinder is leaky. service partner. Malfunction: The round bale is conically shaped. Possible cause Remedy „...

  • Page 119: Setting The Twine Guide At The Starter Roll

    „ Always wear protective gloves when inserting the wrapping and tying material and when working in the range of the cutting unit. „ When working in the range of the cutting unit, work particularly carefully and prudently. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 120: Checking And Adjusting The Starter Roll And The Pressure Rolls

    Changing O-ring seal on the twine coil starting device If the O-ring seal on the twine coil starting device is defective, the twine will not be injected when tying starts. The O-ring seal must be changed. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 121: Setting The Tailgate Lock

    "0" and/or the tailgate fails to open and close correctly, the dimensions X and Y at the tailgate lock must be adjusted. ü The machine is shut down and safeguarded, refer to page 24. ü The tailgate is closed. Bellima F 130 Original Operating Instructions 150000148_06_en...

  • Page 122: Setting The Mechanical Baling Pressure Indicator

    „ Push the tailgate to the rear until the lock hook (3) rests against the roll pin (2). RPG000-043 The pictured tensioning device is located on the left-hand as well as on the right-hand machine side, depending on the baling pressure indicator to be aligned. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 123 If the right-hand side baling pressure indicator is not in position "3": ü The right-hand side hood is open. „ Loosen the nuts (2) and tun until the right-hand side baling pressure indicator is in position "3". „ Tighten the nuts (2) against each other. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 124 „ Only jack up the machine by using a suitable car jack. „ Make certain that the machine is stable and safe when it is on blocks. „ Clean the machine thoroughly. Chaff and dirt attract moisture which causes steel parts to start rusting. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 125 Write down all repair jobs which must be performed by the next harvest and arrange for them to be done with sufficient lead time. Your KRONE dealer is better able to perform maintenance service and any required repairs outside the harvest season.
  • Page 126 All synthetic materials must be brought to a recycling centre for synthetic materials. Rubber • Rubber parts (hoses, tyres, …) must be brought to a rubber recycling centre. Electronic scrap • All electronic parts must be brought to a disposal point for electronic scrap. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 127 Behaviour in case of voltage flashover of overhead lines ..............21 Behaviour in dangerous situations and in case of accidents ............24 Bleed the friction clutch on the universal shaft ... 99 Bringing the pick-up to transport/working position ................62 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 128 Connecting the electronic baling pressure indicator ................53 Connecting the machine........14 Connecting the road lighting....... 54 Consumables ..........20, 39 Contact ..............2 Contact data of your dealer ........2 Conversion table ..........10 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 129 Filling the bale chamber ........56 Crop blockages ........114 Fitting wheel chocks ........... 61 Crops between roller and bale formation conveyor chain ........114 Different diameters on left-hand and right- hand side of round bale......118 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 130 Mounting guide wheels on pick-up ..... 42 Mounting hose and cable support ...... 46 Mounting protective cap of universal shaft ..45 Mounting safety chain ........50 Mounting the universal shaft on the tractor ..52 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 131 Preparing starter roll of twine tying ..... 46 Preparing the brake disc of the wrapping material brake ..............47 Preparing the machine for road travel ....76 Preparing the operating cables for mechanical machine functions ..........55 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 132 Setting the wrapping material brake ....84 damage .............. 10 Settings .............. 78 Waste disposal ..........126 Shear bolt for pick-up ........107 Shutting down and safeguarding the machine ... 24 Sources of danger on the machine ....21 Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 133 This page has been left blank deliberately. Bellima F 130 Original Operating Instructions 150000148_06_en...
  • Page 134 Maschinenfabrik Bernard Krone GmbH & Co. KG * Heinrich-Krone-Straße 10 D-48480 Spelle * Postfach 11 63 D-48478 Spelle ' +49 (0) 59 77 / 935-0 6 +49 (0) 59 77 / 935-339 ü www.landmaschinen.krone.de...

Table of Contents