Pos: 52.73 /BA/Info-Center/CCI-ISOBUS-Terminal/CCI-Rundballenpressen/Hauptmenüs/Hauptmenü 1 Einstellungen/Menü 1-9 Bindestartverzögerung Fortima V und F @ 251\mod_1396977096007_78.docx @ 1938746 @ 3 @ 1
8.6.7
Menu 1-9 „Tying Start Delay"
1-9
Fig. 130
Calling the menu
Main menu 1 "Settings" is called.
•
Select menu 1-9
grey.
•
Press function key
The display shows menu 1-9 "Tying Start Delay".
Setting the tying start delay
The time delay is displayed in seconds.
Note
Tying start delay indicates how much time there is between
–
"Setpoint value of bale diameter reached" (Fortima V) or
–
"Setpoint value of bale firmness reached" (Fortima F)
and "Triggering tying process" (in automatic mode).
Due to this function, the driver gets sufficient time to move tractor and machine to a complete
standstill before tying process starts automatically.
•
Use function key
will disappear
•
Press function key
The symbol
•
Pressing function key
•
Pressing function key
Pos: 52.74 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
+
-
CC000216
by pressing function key
or
to set the desired time delay, the symbol
in the upper line indicates that the displayed value is saved.
and holding it down closes the called up menu
and holding it down brings up the basic screen
KRONE ISOBUS Terminal
or
, the symbol is highlighted in
in the upper line
CC000754
165