Pos: 64.32.22 /BA/Wartung/Sensoren/Sensor Messerboden Fortima @ 114\mod_1338804171247_78.docx @ 1005228 @ 3 @ 1
13.7.4
Sensor Position Blade Shaft (Machines with Cutting Device)
2
a
Fig. 251
The position blade shaft sensor (1) can be found on the right machine side on the blade shaft.
Setting:
1. Loosen the counter nut (2)
2. Set the sensor (1) in a distance of a = 2 mm to the lever (3) (lever swivelled upwards).
3. Tighten the counter nut (2)
The height of the sensor (1) can also be adjusted. Adjust the sensor in that way that the sensor
in the sensor test can be recognised as alive.
Pos: 64.33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
1
3
RB-4-004
Maintenance
289