Pos: 42.15 /Überschriften/Überschriften 3/A-E/A/Abstellstütze @ 109\mod_1335355963452_78.docx @ 976541 @ 3 @ 1
4.8.3
Parking Support
Pos: 42.16 /BA/Sicherheit/Rundballenpresse/Allgemeiner Text Abstellstütze Ultima_Comprima_Fortima @ 307\mod_1416475698656_78.docx @ 2386466 @ @ 1
The parking support ensures that the machine is stable when it is not hitched to the tractor.
Pos: 42.17 /BA/Inbetriebnahme/Rundballenpresse/Bild Abstellstütze bewegen_Fortima @ 307\mod_1416475236749_78.docx @ 2386115 @ @ 1
2
3
4
5
Fig. 11
Pos: 42.18 /BA/Inbetriebnahme/Rundballenpresse/Hinweis Abstellstütze bewegen @ 32\mod_1253539702220_78.docx @ 314734 @ @ 1
Note
Risk of hands and feet when the parking support is actuated!
Pos: 42.19 /Überschriften/Zwischenüberschriften/Abstellstütze hochdrehen @ 307\mod_1416476205018_78.docx @ 2386532 @ @ 1
Raising the parking support
Pos: 42.20 /BA/Inbetriebnahme/Rundballenpresse/Abstellstütze hochdrehen Fortima_Text @ 307\mod_1416476634609_78.docx @ 2386620 @ @ 1
•
As soon as the machine is connected to the tractor, turn the crank (1) several revolutions
clockwise until the support jack (5) has been relieved.
•
Pull out locking bolt (3) on the lower part of the parking support (2).
•
Push in support tube (4) until the strut (6) is in the notch (7).
•
Secure in position with the locking bolt (3).
•
Then raise the parking support (2) all the way.
Pos: 42.21 /Überschriften/Zwischenüberschriften/Abstellstütze herunterdrehen @ 307\mod_1416476276253_78.docx @ 2386563 @ @ 1
Lowering the parking support
Pos: 42.22 /BA/Inbetriebnahme/Rundballenpresse/Abstellstütze herunterdrehen Fortima_Text @ 307\mod_1416477042286_78.docx @ 2386711 @ @ 1
•
Turn the crank (1) on the parking support several revolutions anticlockwise.
•
Remove locking bolt (3) and pull support tube (4) out of the parking support (2).
•
Secure with locking bolt (3) again.
•
Crank the support jack (5) firmly onto the ground until the drawbar has been relieved.
Pos: 42.23 /BA/Erstinbetriebnahme/Großpackenpressen/Abstellstütze/Abstellstütze Standfläche vergrößern @ 302\mod_1413968281921_78.docx @ 2353503 @ @ 1
Note
In order to increase the base of the support jack when the ground is soft, use a suitable
support.
Pos: 42.24 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
7
6
1
Safety
FOR00072
47