Krone Fortima F 1250 Original Operating Instructions page 160

KRONE ISOBUS Terminal
Setting pre-signalling:
Fortima F
The value is displayed as percentage.
Fig. 124
• Set the desired time delay by using function keys
goes out
• Press function key
line.
• Pressing function key
• Pressing function key
Pos: 52.65 /BA/Info-Center/Rundballenpresse/Hauptmenü 1 Einstellungen/Menü 1-5 "Vorsignalisierung" Fortima - Beispiel @ 250\mod_1396957366169_78.docx @ 1937482 @ @ 1
Example
Set target value of bale diameter: 1.50 m
Set value of pre-signalling: 25 cm
The audio signal sound can be heard if the actual value of the bale diameter is 1.25 m.
Pos: 52.66 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
160
25
0
CC000234
, the set time delay is saved, the symbol
closes the called up menu
and holding it down brings up the basic screen
Fortima V
The value is displayed in cm.
or , symbol
CC000213
in the upper line
appears in the upper