Operating The Central Chain Lubrication System - Krone 1022623 Original Operating Instructions

8 Operation
8.20

Operating the central chain lubrication system

RP000-290
„ Switch off the PTO shaft and the tractor engine.
„ Remove the ignition key and take it with you.
„ Move the cover (1) to the side.
„ Remove the actuating lever (2) from the storage compartment and attach to the drive shaft
for the pick-up (3) on the right-hand side of the machine.
„ Manually turn back the feed rotor with the actuating lever.
WARNING! Risk of injury or damage to the machine from an attached actuating lever (2)
when putting the machine back into operation! To avoid injuries, remove the actuating
lever (2) and place in the storage compartment.
„ Reset the machine.
„ Close the cover (1).
„ Shut down and safeguard the machine,
„ Manually remove the crops which are still in the feed rotor or in the pick-up.
8.20 Operating the central chain lubrication system
RPG000-078
94
RH
1
refer to page 27.
LH
2
3
Original Operating Instructions 150001049_01_en
4
5
6
6
Comprima F 155