Pos: 60.45.1 /Überschriften/Überschriften 2/P-T/Reversieren (Ausführung mit Förderrotor) @ 194\mod_1383557494325_78.docx @ 1649783 @ 2 @ 1
11.15
Reversing
Pos: 60.45.2 /BA/Bedienung /Rundballenpresse/Gutflussblockaden entfernen/Förderrotor ab Baujahr 2013 @ 212\mod_1389717240730_78.docx @ 1740986 @ @ 1
(feed rotor produced from 2013 onwards)
Pos: 60.45.3 /BA/Bedienung /Rundballenpresse/Gutflussblockaden entfernen/Warnung - Unkontrollierte Bewegung der Maschine @ 196\mod_1384152827408_78.docx @ 1658910 @ @ 1
WARNING! – Unexpected movements of the machine!
Effect: Injuries or damage to the machine
•
Eliminate blockages only when the machine is stopped. Switch off the engine and remove
the ignition key.
•
Start up the machine only when all safety devices are mounted and in proper working
order.
Pos: 60.45.4 /BA/Bedienung /Rundballenpresse/Reversieren/a) Bei Ausführung mit manueller Reversiereinrichtung @ 181\mod_1377094768943_78.docx @ 1555276 @ @ 1
a) For version with manual reversing device
Pos: 60.45.5 /BA/Bedienung /Rundballenpresse/Gutflussblockaden entfernen/Zapfwelle und Motor abstellen, Zündschlüssel ziehen @ 181\mod_1377152868819_78.docx @ 1555689 @ @ 1
•
Switch off the PTO shaft and the engine of the tractor.
•
Remove the ignition key.
Pos: 60.45.6 /BA/Bedienung /Rundballenpresse/Reversieren/Manuell reversieren_Bild @ 194\mod_1383636427177_78.docx @ 1650973 @ @ 1
2
COM00001_1
Fig. 195
Pos: 60.45.7 /BA/Bedienung /Rundballenpresse/Reversieren/Manuell reversieren - Vorgehensweise @ 181\mod_1377153102889_78.docx @ 1555738 @ @ 1
•
Move the cover (1) to the side.
•
Remove the actuating lever (2) from the twine box and attach to the drive shaft for the pick-
up (3) on the right-hand side of the machine.
•
Manually turn back the feed rotor with the actuating lever.
•
Reset the machine and manually remove any remaining crops from the feed rotor or the
pick-up.
WARNING! - Actuating lever on drive shaft when restarting machine!
Risk of death or serious injuries, significant property damage.
•
Detach actuating lever and place in twine box before restarting the machine.
•
Remove the actuating lever (2) and place in the twine box.
•
Close the cover (1).
Pos: 60.45.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
1
3
Operation
241