Krone Fortima F 1250 Original Operating Instructions page 298

Maintenance
Pos: 64.74 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Fortima F 1250 (MC) / F 1600 (MC)_sprachneutral @ 235\mod_1394190129453_0.docx @ 1869654 @ @ 1
Fortima F 1250 (MC) / F 1600 (MC)
Pos: 64.75 /BA/Wartung/Rundballenpresse/Spannen Ketten Walzenantrieb_F1250 (MC), F1600 (MC) @ 314\mod_1421929476676_78.docx @ 2428455 @ @ 1
Roller drive
2
Fig. 258
The roller drive is located on the right-hand machine side.
Checking/setting the compression spring (1):
• Check whether dimension (a) is 90 mm.
• For setting, turn the nut (2) until the dimension is reached.
Then:
• Check whether dimension (a) is 170 mm.
• For setting, turn the nut (3) until the dimension is reached and lock with nut (4).
Pos: 64.76 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @ @ 1
Pos: 64.77 /BA/Wartung/Rundballenpresse/Spannen Ketten Förderschnecke @ 34\mod_1256108241894_78.docx @ 325841 @ @ 1
Auger conveyor drive
Fig. 259
The auger conveyor drive is located on the pick-up on the left side of the machine.
To check the chain tension:
The length of the spring when tensioned must be a = 30 mm.
To correct the chain tension:
• Turn the nut (1) until the dimension a = 30 mm is set.
Pos: 64.78 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
298
1
3
4
FOR00067_1
a
1
RBV06280