Hose Holder Assembly - Krone Fortima F 1250 Original Operating Instructions

Commissioning
Pos: 46.59 /Überschriften/Überschriften 2/K-O/Montage Schlauchhalter @ 32\mod_1253538064080_78.docx @ 314638 @ 2 @ 1
5.5

Hose holder assembly

Pos: 46.60 /BA/Erstinbetriebnahme/Rundballenpresse/Bild Befestigungsmaterial @ 32\mod_1253535577392_78.docx @ 314511 @ @ 1
Fig. 46
Pos: 46.61 /BA/Erstinbetriebnahme/Rundballenpresse/Montage Befestigungsmaterial @ 32\mod_1253535783611_78.docx @ 314534 @ @ 1
• The hose holder (1) is mounted on the drawbar with the fastening materials (2).
Pos: 46.62 /BA/Erstinbetriebnahme/Rundballenpresse/Bild Schlauchhalter montieren @ 32\mod_1253536463064_78.docx @ 314559 @ @ 1
4 3
Fig. 47
Pos: 46.63 /BA/Erstinbetriebnahme/Rundballenpresse/Schlauchhalter montieren @ 32\mod_1253536529767_78.docx @ 314584 @ @ 1
• Guide the hose holder (5) through the oblong holes on the drawbar (6).
• Fasten the hose holder onto the drawbar with clamps (4), screws (1), washers (2) and self-
locking nuts (3).
• Guide the hoses (7) through the eye of the hose holder (5).
Pos: 46.64 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
76
2
1
2
1
RBV01080
5
6
7
5
RP-A-026