Operation
Pos: 60.19 /BA/Bedienung /Rundballenpresse/Abscherschraube @ 35\mod_1256128089316_78.docx @ 326536 @ 2 @ 1
11.6
Shear screw for pick-up drive
3
Fig. 166
To protect against overload the pick-up drive and the feed auger drive, which is located behind
the guard (3), are secured with a shear screw at the upper chain wheel.
•
If a malfunction occurs, dismantle the fastening nuts (1). Remove the protective cover (3).
•
Check condition of shear screw (4) and replace if necessary.
Note
There are 3 spare screws (2) on the inside of the protective cover (3) M10 x 35 single-action
24017, DIN 933 8.8 (Order No. 900 638).
•
Attach protective cover (3).
Pos: 60.20 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
214
1
2
KR201141
4
KR201201