Operating The Central Chain Lubrication System - Krone Comprima V 180 Original Operating Instructions

8.17

Operating the central chain lubrication system

RPG000-078
The central chain lubrication system is located on the left side of the machine behind the front
side hood. The rails with the dosing units (1) and (4) are located on the right and left sides of the
machine.
With each revolution of the drive shaft, the pump (3) pumps oil out of the tank (2) via the rails
with the dosing units (1) and (4) to the brushes on the drive chains.
Different dosing units are integrated in the rails for each lubrication point. The oil quantity can be
adjusted using the eccentric cam (5) on the drive roll. In doing so, the oil quantity is adjusted for
all dosing units in the entire machine.
To service the central chain lubrication system,
Dosing units on right side of machine
1
2
RPG000-077
The dosing units on the rail on the right side of the machine oil the chains of the following
machine components:
Comprima V 180
Original Operating Instructions 150001053_00_en
RH
1
3 5 7
4 6
Operating the central chain lubrication system
LH
2
3
refer to page 188.
8
Operation
4
5
6
6
7
8
8.17
91