Krone Fortima F 1250 Original Operating Instructions page 70

Commissioning
Pos: 46.28 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @ @ 1
• Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
Pos: 46.29 /BA/Erstinbetriebnahme/Rundballenpresse/Einstellung Anhängehöhe Fortima V 1500 MC @ 113\mod_1338443636963_78.docx @ 1001801 @ @ 1
2
1
Fig. 38
4. Unscrew the locknuts (3) until the drawbar (1) in the lock washer connection (2) turns.
5. Adapt the drawbar (1) to the height of the tractor hitch.
1
5
3
Fig. 39
6. Unscrew the screw connection (4).
7. Align the towing eye (3) parallel to the ground.
8. Tighten the screw connections (2) and (4) with an appropriate torque.
Note
Serrated washers (5) must mesh.
Tighten screw joints after 10 operating hours!
Pos: 46.30 /BA/WartungHinweis Anzugsmomente beachten (siehe Kapitel Wartung „Drehmomente"). (2015-03-10 09:48:28) @ 26\mod_1245736259299_78.docx @ 263361 @ @ 1
Note
Mind the tightening torques (refer to chapter Maintenance "Tightening torques").
Pos: 46.31 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
70
3
VP-1-014
2
4
VP-1-008
2
5