Setting Lock Hook Blocker - Krone Fortima F 1250 Original Operating Instructions

Pos: 64.18 /Überschriften/Überschriften 3/A-E/E/Einstellung der Verschlusshakensperre @ 236\mod_1394519400468_78.docx @ 1873158 @ 3 @ 1
13.3.1

Setting Lock Hook Blocker

Pos: 64.19 /Abkürzungen /Abkürzungen sprachneutral/Rundballenpressen/Fortima F 1250 (MC) / F 1600 (MC)_sprachneutral @ 235\mod_1394190129453_0.docx @ 1869654 @ @ 1
Fortima F 1250 (MC) / F 1600 (MC)
Pos: 64.20 /BA/Wartung/Rundballenpresse/Einstellung der Verschlusshakensperre Fortima F @ 114\mod_1338791139393_78.docx @ 1004281 @ @ 1
1
Fig. 239
The following settings of the lock hook blocker (1) must be checked and adapted, if necessary,
to ensure the proper function of the lock hook blocker (with opened tailgate):
• Check whether the distance between adjusting screw (3) and button (4) is a = 2-5 mm.
If this is not the case, perform the following setting:
1. Loosen the counter nut (2)
2. Turn the adjusting screw (3) until the distance is a = 2-5 mm.
3. Tighten the counter nut (2).
a
4
Fig. 240
• Check whether the distance between lock hook blocker (1) and stop (2) is a = 2-5 mm.
If this is not the case, perform the following setting (with opened tailgate):
1. Loosen the both nuts (3).
2. Move the stop in the oblong holes (4) until the distance is a = 2-5 mm.
3. Tighten the nuts (3).
Pos: 64.21 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
2 1
3
FOR00037
3
4
2
a
Maintenance
FOR00036
279