Pos: 48.5 /Überschriften/Überschriften 2/A-E/Anbau an den Traktor @ 0\mod_1199717845194_78.docx @ 34039 @ 2 @ 1
6.1
Mounting onto the Tractor
Pos: 48.6 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @ @ 1
•
Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting
down and safeguarding the machine".
Pos: 48.7 /BA/Inbetriebnahme/Rundballenpresse/Anhängen an den Traktor Rundballenpresse @ 32\mod_1253539550486_78.docx @ 314709 @ @ 1
The machine comes standard equipped with a hitch of Ø 40 mm (DIN 11 026). Depending on
the specific requirement, the following hitches are also available:
•
Ball-head hitch (K 80),
•
Rotating hitch (export only),
•
Hitch connection (export only).
Hitch and secure the machine according to regulations on the hitch of the tractor.
Pos: 48.8 /BA/Inbetriebnahme/Rundballenpresse/Bild Abstellstütze hoch @ 32\mod_1253540047376_78.docx @ 314759 @ @ 1
Fig. 50
Pos: 48.9 /BA/Inbetriebnahme/Rundballenpresse/Abstellstütze hochdrehen Fortima V 1500 MC @ 32\mod_1253540733033_78.docx @ 314784 @ @ 1
To raise the parking support:
•
As soon as the machine is connected to the tractor, turn the crank (1) several revolutions
clockwise until there is no more weight on the parking jack (3).
•
Withdraw the locking bolt (5) on the lower part of the parking support (2), push in the
parking support (2) and secure it in position with the locking bolt (5).
•
Then crank the parking support (2) up all the way.
•
Turn the parking jack (3) so that the flat side is facing the pick-up.
Pos: 48.10 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
CPB00101
Start-up
79