Initial Configuration; Review Digi Ix14 Default Settings; Access The Digi Ix14 Local Web Ui - Digi IX14 User Manual

Initial configuration

Review Digi IX14 default settings

The following table lists factory default settings for the Digi IX14.
Central
management
Interface
priorities
Modem
configuration
Network
settings
Security
policies
Services
Monitoring

Access the Digi IX14 local web UI

To connect to the Digi IX14 local web UI:
1. Use an Ethernet cable to connect the Digi IX14 WAN/ETH1 port to a laptop or PC.
2. Open a browser and go to 192.168.2.1.
3. Log into the device using the default user name root and the unique password printed on the
label packaged with your device. The local web admin main screen appears.
Digi IX14 User Guide
Digi Remote Manager enabled as the central management service
n
Modem (cellular) is WAN interface with metric of 3
n
LAN (Ethernet) with metric of 5
n
SIM failover after 5 attempts
n
LAN subnet of 192.168.2.1/24
n
DHCP enabled
n
Source NAT enabled
n
(outbound traffic)
Packet filtering allows all outbound traffic
n
SSH, web admin, and local admin access enabled
n
Bluetooth service enabled to allow the Digi Remote Manager mobile app to
n
automatically register using the QR code on the device label. You can disable
Bluetooth service after the device is provisioned.
Device heath metrics uploaded to Digi Remote Manager at 60 minute
n
interval.

Review Digi IX14 default settings

31