First Aid For Working With Printing Materials; Contact With Skin; Contact With Eyes; Ingestion - Stratasys Objet500 User Manual

3d printing system
Hide thumbs Also See for Objet500:
Table of Contents

Advertisement

Objet500 User Guide
First Aid for Working with Printing Materials
In general, try to avoid direct contact with uncured printing material. If skin or 
eyes come into contact with it, wash the area immediately and thoroughly with 
water, and follow these first-aid instructions.
The Material Safety Data Sheet (MSDS) that accompanies printing materials 
contains important safety information. Keep this in an accessible place where 
these materials are used and stored.
Contact with Skin
If uncured printing material comes in contact with skin, wash the affected area 
immediately and thoroughly with soap and cool water, then remove 
contaminated clothing. Pay particular attention to flushing the hair, ears, nose 
and other parts of the body that are not easily cleaned. 
➢  Use cool water to prevent skin pores from opening, so that the liquid material 
➢  Do not use solvents to clean skin. 
➢  If large areas of skin have been exposed, or if prolonged contact results in 
➢  Avoid the accidental transfer of printing material from the hands to other 
➢  If protective cream was used, do not reapply it until the skin has been 
Contact with Eyes 
If uncured printing material comes in contact with the eyes, flush immediately 
with large amounts of water for 15 minutes and seek medical attention. 
➢  Avoid sunlight, fluorescent light, and other sources of ultraviolet radiation. 
Wearing contact lenses when handling liquid printing materials is not 
recommended. If the liquid splashes into the eyes when contact lenses are worn, 
immediately remove the lenses and flush the eyes with water. 
➢  Clean and disinfect the contaminated lenses. 
➢  Do not wear contact lenses until eye irritation disappears.

Ingestion

If printing material is swallowed, refer to the instructions included with the 
cartridge. Seek medical attention immediately.
DOC-07027 Rev. I
does not easily penetrate the skin. 
blisters, seek medical attention. In any case, if irritation persists, seek medical 
attention. 
areas of the body, especially to the eyes. 
completely cleansed. 
2 Safety
2-8

Advertisement

Table of Contents
loading

Table of Contents