Print Job Controls - Stratasys K6 Series User Manual

PRINT JOB CONTROLS

Three buttons are displayed at the bottom of the Build page (just beneath the Print Job Status Display). These
buttons are used to start, pause, and abort a build.
Figure 4-18:
BUILD (PLAY) BUTTON
The Build button, which resembles the "Play" control for a media device, allows you to start a build (see
"Selecting a Job to Build" on page 167
states:
Table 4-6: Print Job Controls - Build (play) Button States
Button State
Blue (no white highlighted
Blue (white highlighted
Print Job Controls
for more information). The Build (play) button can appear in the following
Description
Printer is in a buildable state AND a selected job is available to
build OR printer is currently paused or aborted.
Selecting the Build (play) button will begin/resume the build.
border)
Printer is actively building.
Selecting the Build (play) button in this state has no effect.
border)
Build (play) button is disabled and not selectable.
Printer is not in a buildable state OR a job is not selected/
available to build (e.g. queue is empty).
To troubleshoot this issue, press the Build State button within
the Dashboard. This will open a dialog allowing you to view the
reason(s) for the current build state, including any issues
impeding your ability to start a build (i.e. no vacuum, no build
sheet, etc.). See
"Errors Preventing a Build from Starting" on page 245
information.
"Warnings at Build Start" on page 243
61
and
for more