Printer Operation; Uv Radiation; Printer Maintenance - Stratasys Objet30 User Manual

Objet30 User Guide

Printer Operation

➢ This printer should not be installed in locations where children are likely to
➢ The printer should only be operated by persons trained by an authorized
➢ All persons operating or maintaining the printer should know the location of
➢ Keep fingers and other body parts clear of the printer when closing the
➢ Never attempt to open the printer while it is working.
➢ Never override the interlock safety switch.
➢ If the interlock safety switch ever fails, do not use the printer.
➢ Several parts of the printer remain extremely hot even after it has stopped

UV Radiation

The UV lamp used in the printer emits dangerous radiation.
➢ If the UV lamp remains on when the printer cover is open, do not stare

Printer Maintenance

➢ Service operations should be performed only by qualified personnel who
➢ Notify co-workers and those who have access to the printer before
Report any potential dangers and safety-related accidents to your safety
officer or to other appropriate authorities.
DOC-34025 Rev. I
be present.
Cette imprimante ne doit pas être installée dans des lieux pouvant accueillir
des enfants.
Stratasys representative.
first aid and emergency equipment and how to use it. Never block access
to this equipment.
cover.
operating. Avoid touching the UV lamp and the print block.
directly at the UV light. Shut down the printer and call your Stratasys service
provider.
have been instructed in relevant safety precautions.
beginning non-routine and hazardous work.
2 Safety
2-6