Nm (18.44 Lb Ft); Nm (7.38 Lb Ft) - APRILIA SHIVER 900 Service Station Manual

SHIVER 900
Pos. Description
2 Timing lay shaft fastening screw
3 Special mobile / fixed slider fastening
screw
4 Cam tower / head fastening screws
5 Cam tower / plate fastening screws
6 Decompressor fastening screws
7 Decompressor fastening screw
Pos. Description
1 Water Temperature Sensor
2 Threaded plug
3 Nut for fastening the stud bolts to the
head - Pre-tightening
3 Nut for fastening the stud bolts to the
head - Tightening
4 Head / Cylinder / Crankcase fasten-
ing outside
5 Head / Cylinder / Crankcase fasten-
ing inside
6 Nut for fastening the Stud bolts to the
Head
7 Nut for fastening the Stud bolts to the
Head
8 Screw for fastening the connector to
the discharge
Type Quantity
M24x1.5 2
M8 4
M6x37 16
M4x10 8
M8 2
M5x12.9 2
H
EAD
Type Quantity
M12x1.5 1
M12x1.5 1
M10x1.25 8
M10x1.25 8
M6x75 2
M6x125 4
M6 4
M8x1.25 2
M5 4
Characteristics
Torque
(axle cone and gear
88 Nm (64.91 lb ft) 3M SCOTCH GRIP
18 Nm (13.28 lb ft) 3M SCOTCH GRIP
13 Nm (9.59 lb ft) Follow the number-
ing sequence stam-
ped on the cam tow-
3 Nm (2.21 lb ft) 3M SCOTCH GRIP
28 Nm (20.65 lb ft) 3M SCOTCH GRIP
2353 or Loct. DRI-
LOC 2045 BLUE
5 Nm (3.69 lb ft) 3M SCOTCH GRIP
2353 or Loct. DRI-
LOC 2045 BLUE
Torque
20 Nm (14.75 lb ft)

10 Nm (7.38 lb ft)

Loct. drise AL 506
13 Nm (9.59 lb ft) Lubricate the
threads before tight-
135° + 135°
13 Nm (9.59 lb ft)
13 Nm (9.59 lb ft)
12 Nm (8.85 lb ft)

25 Nm (18.44 lb ft)

6 Nm (4.43 lb ft) Loct. dry loc 2040
Notes
cone)
2353
2353
ers
2353
Notes
-
ening
-
-
-
-
-
CHAR - 43