SHIVER 900
•
Remove the starter's transmission
gear bearing.
•
In the event of a malfunction, the start-
er's transmission gear bearing cannot
be overhauled and must be completely
replaced.
Freewheel removal
•
Heat the magneto flywheel with the
specific heater.
•
Undo and remove the six screws.
•
Remove the freewheel from the mag-
neto flywheel.
Installing the flywheel
•
Insert the starter's transmission gear,
after having coated it with a layer of
grease.
•
Apply the wrench to the crankshaft.
Engine
ENG - 219