APRILIA SHIVER 900 Service Station Manual page 385

SHIVER 900
Pos. Description
1 Clutch pump U-bolt fastening screws
2 Special screw for fastening the pipe
to the clutch cylinder
3 Special screw for fastening the pipe
to the clutch pump
4 Countersunk, hex. socket screws
used for fastening the clutch actuator
cylinder
5 Countersunk, hex. socket screws
used for fastening the clutch actuator
cylinder
Adjustment
It is possible to adjust the distance between the
end of the lever (1) and the grip (2), turning the
adjuster (3).
•
Push the control lever (1) forwards and
turn the adjuster (3) until the lever (1)
is at the desired distance.
•
Turning the adjuster anticlockwise, the
lever (1) gets closer to the grip (2).
C
LUTCH CONTROL
Type Quantity
- 2
M10 1
M10 1
M6x75 1
M6x20 2
Clutch system
Torque
10 Nm (7.38 lb ft)
25 Nm (18.44 lb ft)
25 Nm (18.44 lb ft)
8 Nm (5.90 lb ft) Perform two tight-
ening cycles
8 Nm (5.90 lb ft) Perform two tight-
ening cycles
CLU SYS - 385
Notes
-
-
-