APRILIA SHIVER 900 Service Station Manual page 20

Characteristics
Pos. Description
1 Headstock ferrule (pre-tightening)
1 Headstock ferrule (tightening)
2 Flanged upper steering plate fasten-
ing nut (stop)
2 Flanged upper steering plate fasten-
ing nut (pre-tightening)
2 Flanged upper steering plate fasten-
ing nut (tightening)
3 Cyl. head, hex. socket screws used
for fastening the fork stanchions to
the upper plate
4 Low profile, cyl. head, hex. socket
screw used for fastening the steering
headstock to the upper plate
5 Cyl. head, hex. socket screws used
for fastening the fork stanchions to
the lower plate
6 Cyl. head, hex. socket screws for fas-
tening the lower U-bolt to the upper
steering plate
CHAR - 20
S
TEERING
Type Quantity
M25 1
M25 1
M22 1
M22 1
M22 1
M8x30 2
M8x30 1
M8x35 4
M10x60 2
SHIVER 900
Torque
50 Nm (36.88 lb ft) Steering assembly
15 Nm (11.06 lb ft)
25 Nm (18.44 lb ft)
25 Nm (18.44 lb ft) Loct. 243
25 Nm (18.44 lb ft)
25 Nm (18.44 lb ft)
25 Nm (18.44 lb ft)
25 Nm (18.44 lb ft)
50 Nm (36.88 lb ft) Loct. 243
Notes
settling
-
-
-
-
-
-