APRILIA SHIVER 900 Service Station Manual page 290

Suspensions
Front
Handlebar
Pos. Description
1 Stainless steel, cyl. head Pozidriv
screws used for fastening the upper
U-bolt to the lower U-bolt
2 Electronic accelerator control fasten-
ing screws
3 Light switch fastening screws
4 Cyl. head, hex. socket anti-vibration
counterweight fastener screws
Removing
•
Remove the rearview mirrors and re-
move the rubber clamps used for fas-
tening the column switch and ride-by
wire control wiring to the brake and
clutch pipe.
SUSP - 290
H -C
ANDLEBAR ONTROLS
Type Quantity
M8x25 4
- 1
- 2
M6x45 2
SHIVER 900
Torque
25 Nm (18.44 lb ft)
4 Nm (2.95 lb ft)
1.5 Nm (1.11 lb ft)
10 Nm (7.38 lb ft)
Notes
-
-
-
-