APRILIA SHIVER 900 Service Station Manual page 311

SHIVER 900
Filling oil
THE FOLLOWING OPERATIONS APPLY WHEN
MOUNTING THE RIGHT HAND STEM
•
Place the fork stem vertically on a work
surface.
•
Fill the STEM with the indicated quan-
tity of oil.
WARNING
OPERATE THE PLUNGER MULTIPLE TIMES UNTIL AIR
BUBBLES MAY BE SEEN ON THE SURFACE OF THE OIL.
THE FORK MUST BE PERFECTLY UPRIGHT IN ORDER TO
MEASURE THE CORRECT OIL LEVEL.
Characteristic
Quantity of oil for RH STEM
522 cm³ (31.85 cu in)
•
Check the oil level from the rim of the
sleeve.
Characteristic
Oil level (from sleeve rim, without the spring
and with the pump all the way lowered)
90 mm (3.54 in)
THE FOLLOWING OPERATIONS APPLY WHEN
MOUNTING THE LEFT HAND STEM
•
Place the fork stem vertically on a work
surface.
•
Fill the STEM with the indicated quan-
tity of oil.
WARNING
OPERATE THE PLUNGER MULTIPLE TIMES UNTIL AIR
BUBBLES MAY BE SEEN ON THE SURFACE OF THE OIL.
THE FORK MUST BE PERFECTLY UPRIGHT IN ORDER TO
MEASURE THE CORRECT OIL LEVEL.
Characteristic
Quantity of oil for LH stem
401 cm³ (24.47 cu in)
Suspensions
SUSP - 311