APRILIA SHIVER 900 Service Station Manual page 212

Engine
Pos. Description
1 Gear sensor fastening screw
2 Selector plate fastening screw
3 Desmodromic drum/sprocket fasten-
ing screw
4 Selector pin fastening screw
5 Ratchet pin fastening screw
Removing the gear selector
•
After having removed the clutch side
cover and the complete clutch, the
gear shift selector shaft can be extrac-
ted, taking care to retrieve the flat
washer.
Checking the gear selector
Selector spring
Make sure that the spring ends on the two shifting
positions (forward = downshifting and backward =
up-shifting) are always in contact with the selector
plate
Make sure that the clearance between the end of
the spring on the selector plate and the stop pin is
almost null, when in home position (see diagrams)
Pawl
Make sure that both pawl tips run free, without
jamming
ENG - 212
G
EAR SELECTOR
Type Quantity
M5 2
M5x12 3
M8x1.25x17 1
M10x1.5 1
M6 1
SHIVER 900
Torque
6 Nm (4.43 lb ft) Loct. 270
5 Nm (3.69 lb ft) 3M SCOTCH GRIP
15 Nm (11.06 lb ft) 3M SCOTCH GRIP
16 Nm (11.80 lb ft) Loct. 242
12 Nm (8.85 lb ft) Loct. dry loc 2040
Notes
2353
2353