APRILIA SHIVER 900 Service Station Manual page 125

SHIVER 900
Specification
A) 10A fuse
B) 15A fuse
F) 7,5A fuse
D) 15A fuse
E) 15A fuse
C) 7.5A fuse
G) spare fuses
Auxiliary fuses are placed in the central part of the motorcycle, under the rider saddle.
MAIN FUSES
To check the main fuse (H)
•
Remove the protective cover (3), un-
screwing the two screws (4).
•
Remove the protective cover, take out
the fuse (H) and check whether the fil-
ament (2) is broken. In this case
change it with one of the same amper-
age.
CAUTION
REMOVING THE 30A FUSE RESETS THESE FUNCTIONS
ON THE DASHBOARD:
To check the main fuse (L)
•
Remove the protective cover, take out
the fuse (L) and check whether the fil-
ament (2) is broken. In this case
change it with one of the same amper-
age.
AUXILIARY FUSES DISTRIBUTION
Lights relay/high beam relay, buttons and brake lights/horn,
Desc./Quantity
daylight running lights (front, rear)/license plate
ECU live positive lead
ECU permanent positive lead
Coils, injectors, fuel pump, secondary injection relay
Low beam/high beam lights
Fan
-
Electrical system
ELE SYS - 125