APRILIA SHIVER 900 Service Station Manual page 194

Electrical system
•
In case of CAN error during acquisition, system warns that the procedure can not be com-
pleted due to a communication problem on the CAN line.
•
If the signal is not plausible, there was a transcription error of the value of the rear wheel
radius from the non volatile memory (EEPROM) to the volatile memory (RAM) at key ON.
In this case the default value is used.
This error is indicated by lighting up in a fixed manner the MI warning light
NOTE
THIS ERROR DISABLES THE TRACTION CONTROL.
ELE SYS - 194
SHIVER 900