APRILIA SHIVER 900 Service Station Manual page 232

Engine
•
Place the washer correctly between
the clutch housing and the hub.
•
Position the clutch hub.
•
Install the clutch cover.
•
Before tightening the clutch nut, check
to make sure that the measurement
has not changed with respect to that
which was measured during the disas-
sembly phase. If it is different, turn the
crank shaft in such a way as to properly
align the engine's oil pump control gear
on the clutch bell with the oil pump's
driven gear.
•
Insert the safety washer.
ENG - 232
SHIVER 900