APRILIA SHIVER 900 Service Station Manual page 351

SHIVER 900
•
Retrieve the washers (5), the spacers
(6) and the rubber grommets (7), and
replace them if necessary.
Removing the exhaust manifold
FRONT MANIFOLD
•
Remove the lower fairing and cut the
upper clamp (1) that fastens the front
lambda probe wiring harness to the
ABS pump support frame.
•
Remove the lower clamp (2).
•
Disconnect the front lambda probe
connector (3) and free the wiring har-
ness.
Chassis
CHAS - 351