APRILIA SHIVER 900 Service Station Manual page 117

SHIVER 900
Error cause
•
There is a fault in the instrument panel
Troubleshooting
•
Replace the instrument panel
System not programmed
Storing new keys
NOTE
REGARDLESS OF THE LANGUAGE SET IN THE DASHBOARD FUNCTIONS, THE KEY PRO-
GRAMMING PROCEDURE CAN ONLY BE VIEWED IN ENGLISH.
•
To carry out the one or more key pro-
gramming procedures, up to a maxi-
mum of four, you must connect the
motorcycle to the diagnostic tool.
•
Turn key to "ON" and insert the USER
CODE where required.
•
Carry out the self-diagnosis of the
dashboard and enter the "SETTINGS"
section by clicking on "RESET KEYS".
•
At this point, a screen with a warning
message will be visible. Press "OK"
and start programming the keys.
NOTE
IF THE IMMOBILIZER ANTENNA IS DISCONNECTED, YOU
WILL NOT BE ABLE TO START KEY PROGRAMMING.
•
Enter the USER CODE to continue.
•
If the code entered is correct, the first
key is stored.
Electrical system
ELE SYS - 117