APRILIA SHIVER 900 Service Station Manual page 102

Electrical system
TABLE B1 - MAIN SADDLE SUPPORT WIRING
HARNESS
•
The main wiring harness (1) must be
routed under saddle support frame
crossbar.
TABLE C - STARTER RELAY
•
Check that the two screws used for
fastening the cables are secured cor-
rectly. Failure to secure them correctly
may result in fires and vehicle malfunc-
tions.
TABLE D - SADDLE SUPPORT ZONE
•
Position a large clamp (1), and then,
after connecting the read light assem-
bly connector (2), position it as indica-
ted.
ELE SYS - 102
SHIVER 900