APRILIA SHIVER 900 Service Station Manual page 216

Engine
Pos. Description
9 Bracket to starter motor fastening
screw
10 Starter motor bracket to crankcase
fastening screw
Removing the flywheel cover
•
Remove the flywheel cover inspection
cap.
•
Unscrew and remove the ten screws (1
- 2).
NOTE
THE SCREW (2) FOR THE FLYWHEEL COVER IS SHORT-
ER THAN THE OTHER SCREWS (1).
•
Position the appropriate tool in screw it
in a clockwise direction until the fly-
wheel cover has been partially extrac-
ted.
Specific tooling
020712Y Handle for removing the flywheel cov-
er
•
Remove the flywheel cover.
Specific tooling
020712Y Handle for removing the flywheel cov-
er
ENG - 216
Type Quantity
M6x14 2
M6x16 2
SHIVER 900
Torque Notes
7 Nm (5.16 lb ft) Loct. 242
13 Nm (9.59 lb ft) -