APRILIA SHIVER 900 Service Station Manual page 87

SHIVER 900
TABLE C2 - FRONT ABS SENSOR
•
Fasten the ABS sensor wiring harness
to the brake pipe using the cable
clamps (5) and two clamps (6), under
the lower steering plate and in align-
ment with the brake pipe fastening
plate, under the steering headstock.
TABLE C3 - FRONT ABS SENSOR
•
Check that the front ABS sensor con-
nector is inserted correctly and cou-
pled to the respective support posi-
tioned under the filter box.
Central part
CAUTION
THE FOLLOWING IMAGES ILLUSTRATE THE MAIN/ENGINE WIRING HARNESS INSTALLED ON
THE ENGINE, COMPLETE WITH THE FILTER BOX. IF NECESSARY, WHEN CARRYING OUT
MAINTENANCE WORK, THE WIRING HARNESS MUST BE INSTALLED AFTER POSITIONING
THE ENGINE ON THE FRAME.
Electrical system
ELE SYS - 87