APRILIA SHIVER 900 Service Station Manual page 128

Electrical system
•
Lambda probe / - (indicates if the lambda probe is operating)
•
Engine mode / -
•
Tone wheel / - (tone wheel status)
•
Ign. Activ. rec. status / - (ignition activation recognition status)
•
Fan relay / - (status of the cooling fan relay)
•
Engine stepper status / - (engine stepper status)
•
Start-up request / -
•
Clutch / -
•
Gearbox in neutral / -
DIAGNOSTIC TOOL:ACTIVATIONS
•
Coil / (coil actuator)
•
Fuel pump / (fuel pump activation)
•
Injector activation / (injector activation)
•
Warning light / (warning light activation)
•
Stepper circuit / (stepper circuit electric test)
•
Fan activation / (fan connection activation)
•
Headlights relay / (activates the headlight relay)
DIAGNOSTIC TOOL: ADJUSTMENTS
•
Self-adaptive param. reset / (self-adaptive parameter reset)
•
Saved data download / (save data files download)
•
TPS reset
DIAGNOSTIC TOOL: ELECTRICAL ERRORS
P0601 EEPROM error
Electrical diagnosis:
•
Circuit not functioning
Error cause:
•
Replace the injection control unit.
The instrument cluster indicates the presence of this error with the MI warning light on fixed.
NOTE
THIS ERROR GENERATES THE RECOVERY STATUS AND ENGINE SHUT-DOWN.
P0604 RAM Error
Electrical diagnosis:
•
Circuit not functioning
Error cause:
•
Replace the injection control unit.
The instrument cluster indicates the presence of this error with the MI warning light on fixed.
ELE SYS - 128
SHIVER 900