SHIVER 900
Removing the flywheel cover components
•
Remove the two pick-up fixing screws.
•
Remove the three stator fixing screws.
CAUTION
THE PICK-UP AND STATOR SHALL BE REMOVED SIMUL-
TANEOUSLY AS THEY ARE PART OF THE SAME ELEC-
TRICAL BRANCH.
Magneto flywheel removal
•
Remove the flywheel cover.
•
Unscrew and remove the screw and
remove the retention plate.
•
Use a heater to heat the flywheel mag-
net.
•
Use the appropriate tool to block the
flywheel and loosen the screw.
Specific tooling
020713Y Flywheel extractor
Engine
ENG - 217