APRILIA SHIVER 900 Service Station Manual page 410

Bodywork
•
Remove the lights relay (12) from the
support present on the base of the filter
box.
•
Remove the highbeam lights relay (13)
from the support present on the base
of the filter box.
•
Remove the two instrument cannister
support fastening screws (14).
•
Remove the two clamps (15) used to
fasten the main wiring harness to the
cannister support.
•
Disconnect the main wiring harness connector (16) and detach it from its support on the
base of the filter box.
BODYW - 410
SHIVER 900