APRILIA SHIVER 900 Service Station Manual page 333

SHIVER 900
•
Collect the inner O-ring rings (7) and
completely remove the transmission
chain.
Installing
•
After fitting the chain on the pinion and
on the crown, put the inner O-rings (1)
back onto the hammerlock pins (2) and
connect the two ends of the transmis-
sion chain.
•
Place the outer O-rings (3) on the pins.
•
Compress the outer plate (4) using the
appropriate generic tool.
CAUTION
BE CAREFUL NOT TO COMPRESS TOO THE OUTER
PLATE TOO MUCH AS THIS COULD SEIZE THE CHAIN.
Chassis
CHAS - 333