APRILIA SHIVER 900 Service Station Manual page 299

SHIVER 900
•
Taking care not to damage it, secure
the sleeve horizontally in a vice, using
the appropriate protection devices.
•
Extract the dust guard (9).
Specific tooling
AP8140149 Guard for assembly operations
•
Remove the seeger ring (10) from in-
side the sleeve.
•
Pull the stem repeatedly towards your-
self in order to remove it from the
sleeve.
•
Secure the stem in a vice and remove
the plunger fastening screw (11), tak-
ing care not to lose the copper washer
(12).
Suspensions
SUSP - 299