APRILIA SHIVER 900 Service Station Manual page 83

SHIVER 900
TABLE A2 - COLUMN LIGHT SWITCH / RIDE BY
WIRE
•
Secure the various wiring harnesses
using a rubber clamp (7).
TABLE A3 - COLUMN LIGHT SWITCH / RIDE BY
WIRE
•
Connect the connectors and insert
them in the safety cap (8).
•
Using a clamp (9), secure the various
wiring harnesses as indicated, and
then position the connectors assembly
under the steering headstock, inside
the frame.
TABLE A4 - COLUMN LIGHT SWITCH / RIDE BY
WIRE
•
The Ride By Wire gas control connec-
tor must be connected correctly and
fastened to the edges support (10),
while the wiring harness must be fas-
tened to the edges support (12) using
a clamp (11).
Electrical system
ELE SYS - 83